Do you have a problem with getting your rechargeable batteries to start charging on your smart charger? If your smart charger will not acknowledge the battery, the batteries are probably discharged to zero. To correct this situation, we show you how to temp charge back up the battery using a paper clip and for the smart charger to acknowledge the battery again. Using our method, you need to short only the negative terminals.
Like and subscribe!
* Amazon Affiliate Links
Visit main website @ htp://www.autotoys.com for more information, descriptions and articles.
Are you tired of constantly having to replace your non-working rechargeable AAA and AA batteries? If so, you may be able to get them working again with the help of a charger and a little bit of elbow grease. Here’s a step-by-step guide on how to get non-working rechargeable batteries to charge again.
First, you’ll need to gather a few tools: a battery charger, a pair of needle-nose pliers, and a flathead screwdriver. You may also find it helpful to have access to a YouTube video on how to charge non-working rechargeable batteries, as these can provide visual guidance.
Begin by carefully removing the non-working battery from the device it was being used in. If the battery is stuck or difficult to remove, you may need to use the flathead screwdriver or needle-nose pliers to gently pry it out.
Once the battery is removed, it’s time to start charging it. If you have a charger specifically designed for rechargeable batteries, you can use this to charge the battery. If you don’t have a specialized charger, you can also use a regular AA or AAA battery charger as long as it’s appropriate for the size of the battery you’re trying to charge.
Follow the instructions for your charger to begin charging the battery. Some chargers may have indicators to show when the battery is fully charged, while others may need to be left on for a set period of time before the battery is considered fully charged.
If your charger has an indicator light, wait until it turns green or stops flashing to indicate that the battery is fully charged. If your charger doesn’t have an indicator light, you can check the battery by attempting to use it in a device. If the device works, the battery is likely fully charged.
If the battery still doesn’t seem to be holding a charge after you’ve tried charging it, you may need to try some additional troubleshooting steps. These could include trying a different charger, cleaning the battery contacts with a soft cloth, or even trying to revive the battery by shorting it out with a wire (although this should only be attempted if you are comfortable working with electricity and have a strong understanding of the risks involved).
By following these steps, you should be able to get your non-working rechargeable AAA and AA batteries to charge again. While it may take a bit of trial and error, the effort can be well worth it in terms of saving money on new batteries and reducing waste.