How to! LEXUS GX REMOTE START – Full installation of iDatalink Remote Start in a Lexus GX470

Wiring a Lexus GX for a remote start, we show you from beginning to end. Any questions, let us know in the commends.

The products we used:

ADS-AL-CA or FLCAN
Programmer:
Ryobi Soldering Iron :

The links which have ” *** ” following are the products used in this video. For more information, please see http://www.autotoys.com

Basic Compustar Remote Start w/ Remotes:
2 Way Compustar Remote Start :
Best Compustar Remote Start:

Standalone:

Standalone remote start w/ Bypass:
Standalone remote start without Bypass:
Standalone remote start ALARM system without Bypass:
Avital 4105:

Standalone 3x start units:

DBALL2:
Programmer for DBALL:
ADS-AL-CA bypass: ***
Programmer for bypass (required): ***
Audiovox FLCAN:

Bypasses

Blade bypass:
ADS-AL-CA bypass:
Programmer for bypass (required):
Audiovox FLCAN:

Connectors:

3M T-taps: (red for thinner, blue for thicker wires, yellow for thickest wires)
MALE spade connectors into the T-Taps:
Stainless steel self tapping screw:
Butt Connectors:
3M ring terminal:

Tape and Solder:

3M 33+ Electrical tape, used:
3M 1700 Electrical Tape:
Wire Loom:
Solder: https://amzn.to/2IMKC6O
Portasol Butane Soldering:
Ryobi Cordless soldering:
Non stick gaffer tape:

TOOLS:

Pry Tools:
Fluke Meter:
Fluke Probes:
Dewalt Light:
Ryobi Light:

How to wire a WYZE camera outdoors and also waterproof outdoor housing with indoor AC/DC 12v USB

In this video, we show you how to easily wire up an Wyze camera outdoors. The Wyze camera is designed for indoor use, but with the right products, it can be used outdoors. this lasted through an Northeast winter and winds. The Wyze camera uses a micro USB cable for power, it is near impossible to find a long enough cable to run to the camera, and even then, you need to figure out which wires inside the USB cable can be powered or extended. With this solution, you buy a 12v CAR DC adapter (+ and – wires) with an USB end (which plugs into the camera) and simply run 2 wires, which can be labeled and sorted later to a + and – to an AC to DC adapter indoors. You can use any wire to run, speaker wire, etc, any type of paired stranded wire.
Watch our other WYZE videos!!

Parts used:
Waterproof Outdoor Wyze Housing:
Wyze cameras:
USB to 12V adapter:
Waterproof Junction Box:
AC to DC power supply:

Visit http://www.autotoys.com

C Wire for EcoBee, Nest & Honeywell Thermostats – Beginning to End running new wires – SmartHome

We show you how to wire a C-Wire at the Air Handler for EcoBee Thermostat. We also wire a Nest thermostat without the C Wire. We had extra wires in the prerun, so we just connected one of the extra wires at the Air Handler to a C-Wire. We believe this is much better to leave the original installation type correct without using any adapter packs.

Parts we used:
EcoBee Plus thermostat with smart sensor:
3M T-TAP :
3M MALE SPADE:
Extra wire:
Nashua Foil Tape;
Stainless screw:
Google Nest:
Cordless shop vac:
Ryobi Cordless Light:
Multi purpose Ladder:
Diagonal Cutters:

Repair Defective Dremel Cordless Charger (rotary tool & charge base) or charging stations with pins

Dremel Cordless charging tool: When it stops taking a charge, even when battery is firmly seated – it is time to give it some love- and adjust the posts.

For Dremel Tools:
Hook Tools:

Subscribe and like

Chamberland / Liftmaster MYQ 041A7928-3 888LM Door Opener Fix (beeping noise)

This is the fix for the Chamberland / Liftmaster MYQ DoorOpener 041A7928-3 – This can be traced back to faulty Capacitors. When you hear a beeping noise or if it stops working, here is the fix. Be carefuly, the new MYq units may look cheaper, but in reality they come with a subscription plan you need to pay for. Repairing this unit, is much much much cheaper and better for the long run.

If you want to repair it easily, solder on 1 or 2 new 1 farad 2.7 capacitors

buy capacitors here:
Subscribe and like, visit our website at http://www.autotoys.com