Boomerang Fishing Scissor Repair with Vavivas Braid

In this video, we show you how to replace the string on your boomerang fishing scissors when it needs service. Easy to do using existing thin braid which you may have sitting around.

Boomerang Fishing Scissors: https://amzn.to/3QYtV9F *
Fishing Scissors: https://amzn.to/3wozMNQ *
Thin Braid: https://amzn.to/3AeOhF2*
Fishing Pliers : https://amzn.to/3R2tNWC *

* Amazon Affiliate Links

Visit main website @ htp://www.autotoys.com for more information, descriptions and articles

Boomerang fishing scissors are a popular tool among fishermen and women due to their durability and versatility. These scissors are designed to be able to cut through various materials, including braided fishing line and even small fish. However, like any tool, boomerang fishing scissors can become worn or damaged over time and may need to be taken apart for repair. Here’s a step-by-step guide on how to disassemble and repair your boomerang fishing scissors.

First, you’ll need to gather a few tools: a small flathead screwdriver, a pair of needle-nose pliers, and a pair of regular pliers.

Begin by flipping the scissors over so that the blade side is facing down.

Using the small flathead screwdriver, carefully pry off the small rubber covers on the handle of the scissors. These covers are typically located near the pivot point of the scissors.

Once the covers are removed, you should see a small screw on each side of the handle. Using the flathead screwdriver, loosen these screws until they can be removed by hand.

Once the screws are removed, you can gently separate the two halves of the handle. Be careful not to lose any small springs or other parts that may be inside the handle.

Now you should be able to see the pivot point of the scissors, which is a small metal rod that connects the two blades. To remove this rod, you’ll need to use the needle-nose pliers to gently pry it out of its socket on one side of the scissors.

Once the pivot rod is removed, you should be able to separate the two blades of the scissors. Be careful not to lose any small parts or springs that may be attached to the blades.

At this point, you can begin cleaning and repairing the scissors as needed. This may include lubricating the pivot point, replacing any worn or damaged parts, and sharpening the blades.

When you’re finished repairing the scissors, it’s time to reassemble them. Start by placing the pivot rod back into its socket on one side of the scissors.

Next, reattach the two halves of the handle, making sure to align the holes with the screws. Tighten the screws securely, but be careful not to overtighten them.

Finally, replace the rubber covers on the handle and you’re done! Your boomerang fishing scissors should now be good as new.

By following these steps, you should be able to disassemble and repair your boomerang fishing scissors with ease. With proper maintenance, these scissors can last for many fishing trips to come.

Rechargeable Battery Fix for Smart Chargers

Do you have a problem with getting your rechargeable batteries to start charging on your smart charger? If your smart charger will not acknowledge the battery, the batteries are probably discharged to zero. To correct this situation, we show you how to temp charge back up the battery using a paper clip and for the smart charger to acknowledge the battery again. Using our method, you need to short only the negative terminals.

Like and subscribe!

* Amazon Affiliate Links

Visit main website @ htp://www.autotoys.com for more information, descriptions and articles.

Are you tired of constantly having to replace your non-working rechargeable AAA and AA batteries? If so, you may be able to get them working again with the help of a charger and a little bit of elbow grease. Here’s a step-by-step guide on how to get non-working rechargeable batteries to charge again.

First, you’ll need to gather a few tools: a battery charger, a pair of needle-nose pliers, and a flathead screwdriver. You may also find it helpful to have access to a YouTube video on how to charge non-working rechargeable batteries, as these can provide visual guidance.

Begin by carefully removing the non-working battery from the device it was being used in. If the battery is stuck or difficult to remove, you may need to use the flathead screwdriver or needle-nose pliers to gently pry it out.

Once the battery is removed, it’s time to start charging it. If you have a charger specifically designed for rechargeable batteries, you can use this to charge the battery. If you don’t have a specialized charger, you can also use a regular AA or AAA battery charger as long as it’s appropriate for the size of the battery you’re trying to charge.

Follow the instructions for your charger to begin charging the battery. Some chargers may have indicators to show when the battery is fully charged, while others may need to be left on for a set period of time before the battery is considered fully charged.

If your charger has an indicator light, wait until it turns green or stops flashing to indicate that the battery is fully charged. If your charger doesn’t have an indicator light, you can check the battery by attempting to use it in a device. If the device works, the battery is likely fully charged.

If the battery still doesn’t seem to be holding a charge after you’ve tried charging it, you may need to try some additional troubleshooting steps. These could include trying a different charger, cleaning the battery contacts with a soft cloth, or even trying to revive the battery by shorting it out with a wire (although this should only be attempted if you are comfortable working with electricity and have a strong understanding of the risks involved).

By following these steps, you should be able to get your non-working rechargeable AAA and AA batteries to charge again. While it may take a bit of trial and error, the effort can be well worth it in terms of saving money on new batteries and reducing waste.