Add a new radio to cars with DSP amplifiers! (AX-DSP from AXXESS)

You now have the option to use factory amplifiers, digital OR analog with the brand new AX-DSP converter from Axxess.

Digital Signal Processor with Chime Control and Digital Amp Turn-On Capability

31 band graphic EQ
6 inputs and 6 outputs including front – rear and subwoofer
Selectable high and low level inputs
Front – rear and subwoofer outputs have an independent two-way crossover in-line with the EQ
Front and rear outputs can be delayed independently up to 10ms
Easy behind the radio installation
Can be used with OE and aftermarket radios
Chime control for vehicles with amp-generated chimes (When retaining OEM radio)
Retains Sonar sensors in vehicles where the tone is provided by the amplifier (When retaining OEM radio)
Clipping detection and limiting circuits
Retains OE voice prompts (SYNC and OnStar)
Settings adjusted via Bluetooth application compatible with both Android and Apple devices
Read – Write and Store your configuration for future recall.

Does your car USB port charge your phone way too slowly? Read why.

The USB ports in cars follow older USB standards, USB 1 and maybe USB 2- Since these standards are set, it charges your phone at a very low amperage. Since these standards were set a very very long time ago, phones, tablets and other devices which use USB to charge have dramatically changed. It is not uncommon for you to be using your phone for GPS navigation, have it plugged in and then have it die while it is being plugged in a charging.

Most newer devices require at least 1.5 amps to charge correctly or even more. There is no way to improve the existing USB port in your car to make it charge with more power, but you can use the cigarette lighter plug and get a high amperage charger.

 

Below are some products we recommend

See http://amzn.to/2yMMOIC